We are using cookies to provide statistics that help us to improve. By continuing to use the site you are agreeing to our use of cookies.
Безплатна експресна доставка до адрес за всички поръчки над 49 лв.!
SeaChem PhosGuard

Removes silicate and phosphate
Spherical for optimal hydrodynamics
Irreversible binding
PhosGuard™ rapidly removes phosphate and silicate from marine and freshwater aquaria. Although PhosGuard™ is effective in both fresh and marine water, it will operate better in sea water and the need for it is better defined in sea water. It is not recommended for phosphate buffered freshwater (PhosGuard™ would remove the buffer until saturated). PhosGuard™ is highly porous and bead-shaped to promote easy water flow through and around it, thereby increasing both its efficiency and capacity.
May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, PhosGuard™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater.
Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest™ Phosphate or MultiTest™ Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosGuard™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.

Specifications :

Suitable for : freshwater and saltwater aquarium
Cut : 100/250/500 ml.
Kit contents : 250 ml. for every 300 liters of water
Manufacturer : Seachem
Origin : USA
Importer : Ishop EOOD

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

SeaChem PhosGuard

  • Brand: Seachem
  • Product Code:
  • Availability: 69
  • 16.80 лв.

Available Options

Tags: seachem, phosguard, филтър, медия