SeaChem PhosGuard

  • Stock: In Stock - 136 quantity
  • Brand: Seachem
  • Product code: SE1851
€8.59
more than 1pc?

Description

Removes silicate and phosphate
Spherical for optimal hydrodynamics
Irreversible binding
PhosGuard™ rapidly removes phosphate and silicate from marine and freshwater aquaria. Although PhosGuard™ is effective in both fresh and marine water, it will operate better in sea water and the need for it is better defined in sea water. It is not recommended for phosphate buffered freshwater (PhosGuard™ would remove the buffer until saturated). PhosGuard™ is highly porous and bead-shaped to promote easy water flow through and around it, thereby increasing both its efficiency and capacity.
May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, PhosGuard™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater.
Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest™ Phosphate or MultiTest™ Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosGuard™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.

Specifications :








Suitable for :
freshwater and saltwater aquarium


Cut :
100/250/500 ml.


Kit contents :
250 ml. for every 300 liters of water


Manufacturer :
Seachem


Origin :
USA


Importer :
Ishop EOOD

 

Specifications

Suitable for Freshwater and saltwater aquarium
Importer I Shop Ltd
Manufacturer Seachem
Origin USA
Tags: seachem , phosguard , филтър , медия

Be the first to write a review

Post your rating. Your opinion is important to us and other users

Add review

Наличности в магазини

SeaChem PhosGuard

Изборът тук не променя варианта, който добавяте в количката.

Зареждане на наличностите…